Permanent ON/OFF function

Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.
press “Auto”, “Reset” or “Ambient learn” to quit this mode.

Dim
Press “Dim” btton to automatically dim up or down the
light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. After desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.

Sensor mode
Press “Auto” button, the sensor starts to work and all
settings remain the same as the latest status before the
light was switched on/off.
Reset
Press “Reset” button, all settings go back to factory default settings.
Factory default settings--
Sensitivity=100% / Daylight sensor=disable
Hold time=90s/ Twilight time=5min
Twilight level=10%

Ambient Ambient learn
Press “Ambient learn” button, the latest surrounding lux
value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.

“Test mode”is for testing purpose only, for users to check the functionality and choose the desired
detection range. The sensor goes to test mode automatically after pressing this button.
Test mode defaulted settings--
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A